KA8-1 Hole Saw Core Ejector
A simple, but highly effective method of ejecting the core from a hole saw on completion of the cut.
* Select the appropriate size of ejector for the hole saw.
* Where it's necessary to assemble the two parts of the core ejector, twist the spring on to the ejector plate until it locks into place.
* Twist the spring on the assembled core ejector over the pilot drill until the pilot drill is protruding from the plate.
* Drill the hole.
Using the core ejector will reduce the cutting depth of the saw.
Please note: In some applications it is possible that the core may be ejected from the saw at high speed. Always use safety goggles or glasses and take extra care if drilling vertically.
Suitable for: 20-24mm (25/32-15/16") hole saws
Overall length: 50mm
Rec. Cutting Depth: 7mm for FCH, DCH, D0 & CT
Body Material: Aluminium
